| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
MPC8535ECVTATH Datasheet(PDF) 23 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8535ECVTATH Datasheet(HTML) 23 Page - Freescale Semiconductor, Inc |
|
23 / 126 page ![]() Overall DC Electrical Characteristics MPC8535E PowerQUICC™ III Integrated Processor Hardware Specifications, Rev. 2 Freescale Semiconductor 23 DDR SDRAM Controller I/O supply voltage DDR2 SDRAM Interface GVDD 1.8 V ± 90 mV V 3 DDR3 SDRAM Interface 1.5 V ± 75 mV Three-speed Ethernet I/O voltage LVDD (eTSEC1) 3.3 V ± 165 mV 2.5 V ± 125 mV V5 TVDD (eTSEC3) 3.3 V ± 165 mV 2.5 V ± 125 mV PCI, DUART, system control and power management, I2C, USB, eSDHC, eSPI and JTAG I/O voltage OVDD 3.3 V ± 165 mV V 4 Local bus I/O voltage BVDD 3.3 V ± 165 mV 2.5 V ± 125 mV 1.8 V ± 90 mV V— Input voltage DDR2 and DDR3 SDRAM Interface signals MVIN GND to GVDD V3 DDR2 and DDR3 SDRAM Interface reference MVREF GVDD/2 ± 1% V — Three-speed Ethernet signals LVIN TVIN GND to LVDD GND to TVDD V5 Local bus signals BVIN GND to BVDD V— PCI, Local bus, DUART, SYSCLK, system control and power management, I2C, and JTAG signals OVIN GND to OVDD V4 Operating Temperature range Commercial TA TJ T A= 0 (min) to TJ= 90(max) °C6 Industrial standard temperature range Extended temperature range TA= 0 (min) to TJ= 105 (max) T A= -40 (min) to TJ= 105 (max) Notes: 2. This voltage is the input to the filter discussed in Section 3.2.1, “PLL Power Supply Filtering,” and not necessarily the voltage at the AVDD pin, which may be reduced from VDD by the filter. 3. Caution: MVIN must not exceed GVDD by more than 0.3 V. This limit may be exceeded for a maximum of 20 ms during power-on reset and power-down sequences. 4. Caution: OVIN must not exceed OVDD by more than 0.3 V. This limit may be exceeded for a maximum of 20 ms during power-on reset and power-down sequences. 5. Caution: L/TVIN must not exceed L/TVDD by more than 0.3 V. This limit may be exceeded for a maximum of 20 ms during power-on reset and power-down sequences. 6. Minimum temperature is specified with TA; maximum temperature is specified with TJ. Table 3. Recommended Operating Conditions (continued) Characteristic Symbol Recommended Value Unit Notes |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |