MPC8535ECVTATH datasheet(40/126 Pages) FREESCALE

40 / 126 page

MPC8535E PowerQUICC™ III Integrated Processor Hardware Specifications, Rev. 2

Ethernet: Enhanced Three-Speed Ethernet (eTSEC), MII Management

Freescale Semiconductor

2.9.1

Enhanced Three-Speed Ethernet Controller (eTSEC)

(10/100/1000 Mbps) — FIFO/GMII/MII/TBI/RGMII/RTBI/RMII Electrical

Characteristics

The electrical characteristics specified here apply to all FIFO mode, gigabit media independent interface (GMII), media

independent interface (MII), ten-bit interface (TBI), reduced gigabit media independent interface (RGMII), reduced ten-bit

interface (RTBI), and reduced media independent interface (RMII) signals except management data input/output (MDIO) and

management data clock (MDC), and serial gigabit media independent interface (SGMII). The RGMII, RTBI and FIFO mode

interfaces are defined for 2.5 V, while the GMII, MII, RMII, and TBI interfaces can operate at 3.3V.

The GMII, MII, or TBI interface timing is compliant with IEEE 802.3. The RGMII and RTBI interfaces follow the Reduced

Gigabit Media-Independent Interface (RGMII) Specification Version 1.3 (12/10/2000). The RMII interface follows the RMII

Consortium RMII Specification Version 1.2 (3/20/1998).

The electrical characteristics for MDIO and MDC are specified in Section 2.10, “Ethernet Management Interface Electrical

Characteristics.”

The electrical characteristics for SGMII is specified in Section 2.9.3, “SGMII Interface Electrical Characteristics.” The SGMII

interface conforms (with exceptions) to the Serial-GMII Specification Version 1.8.

2.9.1.1

GMII, MII, TBI, RGMII, RMII and RTBI DC Electrical Characteristics

All GMII, MII, TBI, RGMII, RMII and RTBI drivers and receivers comply with the DC parametric attributes specified in

Table 24 and Table 25. The RGMII and RTBI signals are based on a 2.5-V CMOS interface voltage as defined by JEDEC

EIA/JESD8-5.

Table 24. GMII, MII, RMII, and TBI DC Electrical Characteristics

Parameter

Symbol

Min

Max

Unit

Notes

Supply voltage 3.3 V

LVDD

TVDD

3.13

3.47

1, 2

1 LV

DD supports eTSECs 1.

2 TV

DD supports eTSECs 3.

Output high voltage

(LVDD/TVDD = Min, IOH = –4.0 mA)

VOH

2.40

LVDD/TVDD + 0.3

—

Output low voltage

(LVDD/TVDD = Min, IOL = 4.0 mA)

VOL

GND

0.50

—

Input high voltage

VIH

1.90

LVDD/TVDD + 0.3

—

Input low voltage

VIL

–0.3

0.90

—

Input high current

(VIN = LVDD, VIN = TVDD)

IIH

—40

μA

1, 2,3

3 The symbol V

IN, in this case, represents the LVIN and TVIN symbols referenced in Table 1 and Table 2.

Input low current

(VIN = GND)

IIL

–600

—

μA

Notes:

MPC8535ECVTATH Datasheet(PDF) 40 Page - Freescale Semiconductor, Inc

MPC8535ECVTATH Datasheet(HTML) 40 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL