S25FL256SDPNFAQ datasheet(147/149 Pages) CYPRESS

147 / 149 page

Document Number: 001-98283 Rev. *M

Page 146 of 148

S25FL128S/S25FL256S

–

BWHA

10/10/2014

Global:

Added Extended Temperature Range: -40°C to 125°C

SDR AC Characteristics:

AC Characteristics (Single Die Package, VIO = VCC 2.7V to 3.6V) table: corrected tSU

Min

Configuration Register 1 (CR1):

Latency Codes for DDR Enhanced High Performance table: added 80 MHz

DDR Fast Read (DDRFR 0Dh, 4DDRFR 0Eh):

Updated figures:

Continuous DDR Fast Read Subsequent Access (3-byte Address [ExtAdd=0,

EHPLC=11b])

Continuous DDR Fast Read Subsequent Access (4-byte Address [ExtAdd=1],

EHPLC=01b)

Initial Delivery State:

ASP Register Content table: removed ASPR Default Value row FE4Fh

Ordering Information FL128S and FL256S:

Added Extended Temperature Range: -40°C to 125°C

Updated Valid Combinations table

–

BWHA

05/09/2015

Global:

Updated description of DDR commands to reflect maximum operating clock frequency

of 80 MHz (from 66 MHz)

Command Set Summary:

S25FL128S and S25FL256S Command Set (sorted by function) table: changed max

DDR frequency from 66 MHz to 80 MHz for all applicable DDR commands

Software Interface Reference:

S25FL128S and S25FL256S Instruction Set (sorted by instruction) table: changed max

DDR frequency from 66 MHz to 80 MHz for all applicable DDR commands

Valid Combinations:

Corrected the Package Marking for DS Speed Option

4871631

BWHA

08/24/2015

Replaced “Automotive Temperature Range” with “Industrial Plus Temperature Range” in

all instances across the document.

Updated Signal Descriptions:

Updated Versatile I/O Power Supply (VIO):

Updated description.

Updated to Cypress template.

5348895

TOCU

09/22/2016

Added ECC related information in all instances across the document.

Added Automotive Temperature Range related information in all instances across the

document.

Added Logic Block Diagram.

Updated Electrical Specifications:

Added Thermal Resistance.

Updated Operating Ranges:

Updated Table 6:

Updated minimum value of VCC (low) parameter.

Changed minimum value of tPD parameter from 1.0 µs to 15.0 µs.

Updated Timing Specifications:

Updated SDR AC Characteristics:

Updated Table 12:

Removed Note “For Industrial Plus (-40°C to +105°C) and Extended (-40°C to +125°C)

temperature range, all SCK clock frequencies are 5% slower than the Max values

shown.” and its references.

Updated Table 13:

Removed Note “For Industrial Plus (-40°C to +105°C) and Extended (-40°C to +125°C)

temperature range, all SCK clock frequencies are 5% slower than the Max values

shown.” and its references.

Updated DDR AC Characteristics:

Updated Table 14:

Removed Note “For Industrial Plus (-40°C to +105°C) and Extended (-40°C to +125°C)

temperature range, all SCK clock frequencies are 5% slower than the Max values

shown.” and its references.

Document Title: S25FL128S/S25FL256S, 128 Mbit (16 Mbyte)/256 Mbit (32 Mbyte) 3.0V SPI Flash Memory

Document Number: 001-98283

Rev.

ECN No.

Orig. of

Change

Submission

Date

Description of Change

S25FL256SDPNFAQ Datasheet(PDF) 147 Page - Cypress Semiconductor

S25FL256SDPNFAQ Datasheet(HTML) 147 Page - Cypress Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL